Introduction to Truck Brake Pads Metallic Mixture
Metallic brake pads mixtures are engineered for heavy-duty truck braking systems, combining high-strength metallic fibers and advanced friction modifiers. These brake pads friction materials prioritize durability, heat resistance, and consistent performance under extreme loads. The brake pads formula integrates steel wool, copper alloys, and graphite in precise brake pads mixes, ensuring optimal braking efficiency while minimizing wear on rotors.
Technical Parameters
Key specifications of the metallic brake pads mixture are summarized below:
| Parameter | Value/Range |
|---|---|
| Operating Temperature Range | -40°C to 800°C |
| Friction Coefficient (μ) | 0.40–0.50 (dry/wet conditions) |
| Density | 2.5–3.0 g/cm³ |
| Compressive Strength | ≥60 MPa |
| Wear Rate | ≤0.20 mm³/(N·m) |
| Noise Level | <75 dB (tested at 50 km/h) |
| Packaging Specification | 6 pairs/box, vacuum-sealed bags |
Key Advantages
- High Load Tolerance
- Reinforced with steel fibers and copper alloys, the brake pads formula withstands extreme pressures and temperatures (up to 800°C), ideal for long-haul trucks and heavy cargo .
- Stable friction coefficient reduces brake fade during prolonged downhill braking .
- Extended Service Life
- Metallic brake pads mixes exhibit 25% lower wear rates compared to organic alternatives, reducing replacement frequency .
- Resistant to glazing and cracking, even under frequent stop-and-go traffic .
- Rotor Compatibility
- Low-abrasive composition minimizes scoring on brake discs, preserving rotor integrity and reducing maintenance costs .
- Environmental Compliance
- Asbestos-free and compliant with EU RoHS and ECE R90 standards, ensuring minimal hazardous dust emissions .
Storage and Packaging
- Storage Guidelines:
- Store in dry, temperature-controlled environments (5°C–35°C) to prevent oxidation of metallic components .
- Avoid humidity exceeding 65% to maintain adhesive integrity .
- Packaging:
- Individually wrapped in anti-corrosion, moisture-proof bags with desiccants .
- Bulk shipments use reinforced cardboard boxes with shock-absorbing foam inserts to prevent damage during transit .
Applications
Designed for commercial trucks, buses, and trailers operating under heavy loads or in mountainous terrain. The metallic brake pads mixture is compatible with disc brake systems from brands like Mercedes-Benz, Volvo, DAF, and MAN. Its robust brake pads friction materials ensure reliability in both urban and long-haul scenarios, balancing safety, cost efficiency, and durability.
By leveraging advanced brake pads mixes and rigorous quality testing, this formula delivers unparalleled performance for demanding truck braking systems .