Introduction to Low Metallic Mixture Motorcycle Brake Shoes
Low metallic brake shoes mixture combines specialized friction materials designed to balance performance, durability, and heat dissipation. These brake shoes friction materials typically consist of 10-30% steel fibers, organic resins, and ceramic additives, optimized for reduced noise and consistent braking efficiency. The formula prioritizes minimal wear on brake drums while maintaining high friction coefficients (0.35-0.45) across varying temperatures.
Technical Specifications
| Parameter | Value |
|---|---|
| Composition | Steel fibers, ceramic, resin |
| Friction Coefficient | 0.35–0.45 μ |
| Operating Temperature | -20°C to 350°C |
| Maximum Pressure | 2.5 MPa |
| Dimensions | 11 cm × 11 cm × 3 cm (typical) |
| Packaging | 50 pcs/carton, plastic sealed |
Key Advantages
The brake shoes mixes enhance heat resistance, reducing fade during prolonged braking. Aluminum alloy backing plates (used in variants like Honda CG150 models) improve heat dissipation, while the low-metallic formula minimizes rotor wear. These friction materials deliver stable performance in wet conditions and are compatible with drum brake systems across motorcycles like Suzuki AX100 and Yamaha MIO.
Storage & Packaging Guidelines
brake shoes formula products are vacuum-sealed in moisture-resistant plastic bags and shipped in reinforced cartons (52 cm × 38 cm × 27 cm per 100 units). Store in dry environments below 40°C, avoiding direct sunlight. Bulk orders via sea freight require palletization with waterproof wrapping.