No products were found matching your selection.

Other Related Products

  • Flake Graphite

    产品名称NAME:Flake Graphite(鳞片石墨) 产品描述PRODUCTION DESCRIPTION: Flake graphite is probably the most familiar of the natural graphite materials. Most people are familiar with the finely powdered graphite used as a lubricant, or the “lead” in pencils. Both of these products typically contain flake graphite. As the name implies flake graphite has a distinctly flaky or platy morphology….

  • PASSENGER CAR BRAKE PAD LOW METALLIC (BL-APL03) OE Qualified

    FORMULA NAME:PASSENGER CAR BRAKE PAD LOW METALLIC (BL-APL03) OE Qualified FORMULATION PERFORMANCE BL-APL03 is an OE original matching formula with a white base tone. It has excellent noise and very little dust. It is the best choice for Japanese and Korean cars. The sales volume of this formula is the best in history. Characteristics: Very…

  • Cellulose Fiber

    产品名称NAME:Cellulose Fiber(纤维素纤维) 产品描述PRODUCTION DESCRIPTION: Cellulose fiber is a chemical material extracted from natural wood materials. Owing to water absorption characteristic and three-dimensional structure, the water inside can be transferred to the surfaces or interfaces of friction products quickly, which makes the bond strength and surface strength significantly increased. Its wood fiber dimensional stability and thermal…

  • Brass Fiber

    产品名称NAME:Brass Fiber(黄铜纤维) 产品描述PRODUCTION DESCRIPTION: Brass is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass an…

  • Cellulose Fiber

    产品名称NAME:Cellulose Fiber(纤维素纤维) 产品描述PRODUCTION DESCRIPTION: Cellulose fiber is a chemical material extracted from natural wood materials. Owing to water absorption characteristic and three-dimensional structure, the water inside can be transferred to the surfaces or interfaces of friction products quickly, which makes the bond strength and surface strength significantly increased. Its wood fiber dimensional stability and thermal…

  • Brake Pads Barite Powder

    Application of Barite Powder in Brake Pads Production   Barite powder has carved a niche in the production of brake pads, influencing the composition of brake pads mixes and the overall brake pads mixture. This mineral – based substance brings both positive and negative aspects to the manufacturing and performance of brake pads. Advantages of…

  • Wollastonite

    产品名称NAME:Wollastonite(硅灰棉) 产品描述PRODUCTION DESCRIPTION: Wollastonite is a widely used friction material reinforced fiber, which is gradually replace asbestos as a main reinforced fiber during the friction material production, such as brake linings, brake pads, and other brake system friction material. 颗粒度GRANULARITY(筛网分析 SIEVE ANALYSIS,颗粒大小PARTICLE SIZE) 长度Length of Fiber (lf): 0.384mm 直径Diameter of Fiber (df): 20μm 长径比Length to Diameter Ratio (lf/df):…

  • Zircon Powder

    产品名称NAME:Zircon Powder(锆英石) 产品描述PRODUCTION DESCRIPTION: Zircon is a friction raw material filler, with its Mohs hardness of 7.0 – 7.5, greatly increasing friction coefficient. Zircon is insoluble in water, dilute acids, and hot concentrated sulfuric acid. It is very slight solubility in hydrofluoric acid, reacts with hot concentrated alkali solutions, but does not react with cold dilute alkali solutions….

  • Chalcopyrite Powder

    产品名称NAME:Chalcopyrite Powder (黄铜矿粉末) 产品描述PRODUCTION DESCRIPTION: Chalcopyrite powder is a powder material mainly composed of copper sulfide and iron sulfide. The melting points of iron sulfide and copper sulfide are 1193C and 1033C respectively. When added to brake pads, it can adjust the high temperature wear resistance and wear resistance of friction materials. coefficient of friction. It can…