No products were found matching your selection.

Other Related Products

  • Magnesium Oxide Heavy

    产品名称NAME:Magnesium Oxide Heavy(重镁粉) 颗粒度GRANULARITY(筛网分析 SIEVE ANALYSIS,颗粒大小PARTICLE SIZE) 目数Mesh: 200-400# D80 (μm) ≤75μm(200#) 外观 APPEARANCE 形状Shape: Powder 颜色Color: Light Yellow 主要技术参数MAIN SPECIFICATION 比重Specific Gravity(g/cm3) 3.58 含水量Moisture Rate(% w.t.) ≤0.5% 容积密度Bulk Density(g/cm3) 1-1.2 PH 10.3 熔点Melting Point(℃) 2852 化学成分 CHEMICAL COMPOSITION 组成Composition Ignition Loss MgO SiO2 Fe2O3 Al2O3 CaO Others 比例Rate(%w.t.) ≤2 ≥90 ≤6 ≤0.4 ≤0.8 ≤1…

  • Chopped Glass Fiber 3mm

    产品名称NAME:Chopped Glass Fiber 3mm(玻璃纤维) 产品编号PRODUCT CODE:BL-CGF-E03 产品描述PRODUCTION DESCRIPTION: Chopped Strands fiber glass are fiber glass material that used as reinforcement in the thermoplastic such as engineering plastics, thermoserring resins, polyester and phenol resin.Thermoplastics are used a wide range of industries,and is the most ideal choice of the current constructional fibers. 颗粒度GRANULARITY(筛网分析 SIEVE ANALYSIS,颗粒大小PARTICLE SIZE) 长度Length of…

  • LOW METALLIC (BL-APL02)

    FORMULA NAME:LOW METALLIC (BL-APL02) FORMULATION PERFORMANCE BL-APL02 is a high cost-effective formula with a yellow tone, stable friction coefficient, sensitive braking, and excellent noise performance. Characteristics: Cost-effective Stable coefficient of friction Excellent noise probability Applicable Car Models: Applicable for most passenger cars, especially for European and American cars. Applicable Road Conditions: City, country, national highway…

  • Silicon Carbide Powder

    产品名称NAME:Silicon Carbide Powder(碳化硅粉末) 产品描述PRODUCTION DESCRIPTION: Silicon carbide (SiC), also known as carborundum, is a semiconductor containing silicon and carbon. It occurs in nature as the extremely rare mineral moissanite. Synthetic SiC powder has been mass-produced since 1893 for use as an abrasive. Grains of silicon carbide can be bonded together by sintering to form very hard ceramics…

  • Synthetic Graphite

    产品名称NAME:Synthetic Graphite(人造石墨) 产品描述PRODUCTION DESCRIPTION: Synthetic Graphite, or Artificial Graphite is widely used as basic raw material for brake pads producing and manufacturing. It has the characteristics of elasticity, reduced resistance and lubricity, environmental friendliness, absorbability to liquid adhesives, fusion with water, oil and adhesives. Synthetic Graphite mainly acts as a lubricant in semi-metallic friction materials,…

  • Barite Powder

    产品名称NAME:Barite Powder(重晶石粉末) 产品描述PRODUCTION DESCRIPTION: The main contain of Barite Powder is Barium Sulfate(BaSO4), and it is soluble in hot concentrated sulfuric acid, almost insoluble in water, acid, alcohol. It will easy become lump when it is dry. As a friction raw material filler, it is widely used as a kind of friction performance modifier. 颗粒度GRANULARITY(筛网分析…

  • LOW METALLIC (BL-APL04)

    FORMULA NAME:LOW METALLIC (BL-APL04) FORMULATION PERFORMANCE BL-APL04 is a material with a whole piece of large-grain graphite, which has excellent lubrication, heat conduction, anti-wear and stability; this formula provides a stable high friction coefficient, sensitive braking performance, and excellent noise performance, which can Meet the braking and performance requirements of various high-end cars. Characteristics: High…

  • Wollastonite

    产品名称NAME:Wollastonite(硅灰棉) 产品编号PRODUCT CODE:BL-WNG-60 产品描述PRODUCTION DESCRIPTION: Wollastonite is a widely used friction material reinforced fiber, which is gradually replace asbestos as a main reinforced fiber during the friction material production, such as brake linings, brake pads, and other brake system friction material. 颗粒度GRANULARITY(筛网分析 SIEVE ANALYSIS,颗粒大小PARTICLE SIZE) 长度Average Length of Fiber (lf): 410μm              直径Average Diameter of Fiber (df): 21.6μm 长径比Length…

  • Aramid Fiber

    产品名称NAME:Aramid Fiber(芳纶) 产品描述PRODUCTION DESCRIPTION: Aramid, also well known as Kevlar®, is a kind of organic fiber with good thermal stability. Under the temperature of 180℃, aramid is very stable, can be used for a long time. Only when temperature goes up to 500℃, thermal decomposition starts. Therefore, aramid used as a friction material, will contribute to…