FORMULATION PERFORMANCE BL-ACV-D7 is an economical bus formula with stable performance, suitable for price-sensitive markets and customers Characteristics: 50-80 thousand KM lifetime. Applicable Car Models: Applicable to the low-end and mid-range markets, light trucks PHYSICAL PROPERTIES: Constant Speed Coefficient: 0.35 AK MASTER Coefficient: 0.33 Krauss Coefficient: 0.32 Bulk Density: 1.3 Compacted Density: 3.0 Compression of…
FORMULA NAME：CERAMIC (BL-APC03) OE Qualified FORMULATION PERFORMANCE BL-APC03 is a ceramic formula with a high coefficient of friction. It is a mature OE matching formula. It has excellent performance in all aspects, but the only price is relatively high. Characteristics: Excellent overall performance High temperature resistant Minimal thermal decay Long service life Superior braking performance under…
产品名称NAME：Wollastonite (硅灰棉) 产品描述PRODUCTION DESCRIPTION： Wollastonite can be used to make brake pads, ceramic glazes, etc., and is widely used in industrial production such as automobiles, metallurgy, ceramics, and plastics. Among them, the most promising field of wollastonite consumption in the world is the engineering plastics industry. As a filler and reinforcing agent in the plastic…
产品名称NAME：Rock Wool（岩棉纤维） 产品编号PRODUCT CODE：BL-YM-160 产品描述PRODUCTION DESCRIPTION： Rock wool is a friction raw material reinforced fiber, it is an asbestos substitute material, which helps to substantially bring down the cost of asbestos free friction products. Compared with glass fibers and wollastonite, it can reduce brake noise as well as improve the wear resistance. It is a clean…
产品名称NAME：Calcined Alumina（煅烧氧化铝） 产品描述PRODUCTION DESCRIPTION： Alumina is an inorganic friction raw material filler, and it can greatly increase friction coefficient due to its high mohs scale of hardness. It is widely used as friction raw material filler in friction industry, since it is one of the most efficient friction performance modifier for friction increasing. Usually, its…
产品名称NAME：Mold Release Agent (水乳型脱模剂) 产品编号PRODUCT CODE：BL-MRA-L01 产品描述PRODUCTION DESCRIPTION： This type of mold release agent belongs to non ionic emulsion of polymers and waxes.Water based, silicone oil free, release agent especially developped for demoulding phenolic and epoxy polyester resins. It is mainly used for:Production of Sound Insulation, items as Headliners, felts, parcel shelves, and Friction Materials 外观…
产品名称NAME：Calcium Carbonate Heavy(重钙粉) 颗粒度GRANULARITY（筛网分析 SIEVE ANALYSIS，颗粒大小PARTICLE SIZE） 目数Mesh： 400# D97(μm) ≤33μm 外观 APPEARANCE 形状Shape： Powder 颜色Color： White 主要技术参数MAIN SPECIFICATION 比重Specific Gravity(g/cm3) 2.65-2.75 容积密度Bulk Density(g/cm3) 0.8-1.4 含水量Moisture Rate(% w.t.) ≤0.2% PH 9±0.5 碳酸钙含量CaCO3 Content(%w.t.) ≥98% 白度Whiteness ≥90 莫氏硬度 Hardness(Mohs) 3-4 吸油量Oil Absorption(ml/100g) ≥13.9 化学成分 CHEMICAL COMPOSITION 组成Composition Ignition Loss CaCO3 Al2O3 SiO2 Fe2O3 Moisture HCL insoluble 比例Rate（%w.t.）…
产品名称NAME：Ceramic Fiber（陶瓷纤维） 产品描述PRODUCTION DESCRIPTION： Aluminum Silicate Fiber is also known as Ceramic Fiber（AlSiO3）, is a new type of lightweight friction material reinforced fiber, which can replace asbestos as a main fiber of friction products. This material has a light weight, high temperature resistance, low thermal conductivity, good mechanical vibration, small thermal expansion rate. With special processing,…
产品名称NAME：Wood Pulp Fiber(木浆纤维) 产品描述PRODUCTION DESCRIPTION： Pulp is a lignocellulosic fibrous material prepared by chemically or mechanically separating cellulose fibers from wood, fiber crops or waste paper. As brakes become smaller, the performance of friction materials needs to be better than ever. Adding wood pulp and short-cut fibers improves the performance of brake pads, brake linings…